Document ID: 2097942
|
2009 Chevrolet Aveo
Aveo, Wave, G3, Barina (VIN S/T) Service Manual
Intake Manifold Tuning Valve Actuator Replacement
Removal Procedure
1. Disconnect the vacuum hose from the intake manifold tuning (IMT) valve actuator valve.
Note: Ensure the IMT valve is closed before removing the IMT valve actuator retaining bolts
and valve.
2. Remove the IMT valve actuator valve bolts.
3. Remove the IMT valve actuator valve from the IMT valve.
Installation Procedure
http://localhost:9001/si/showDoc.do?docSyskey=2097942&pubCellSyskey=144110&pubO...
|
| Document ID: 2097942
Repair Instructions
© 2010 General Motors Corporation. All rights reserved.
|
|
Engine
Engine Controls and Fuel - 1.4L (L95)
Page 1 of 2
7/6/2010