Document ID: 2050844
4. Disconnect the camshaft position (CMP) sensor electrical connector.
5. Remove the timing belt front cover. Refer to
Installation Procedure
Caution:
Refer to
1. Install the CMP sensor and bolt.
Tighten the CMP sensor bolts to 7 N·m (62 lb in).
http://localhost:9001/si/showDoc.do?docSyskey=2050844&pubCellSyskey=124369&pubO...
Fastener Caution
in the Preface section.
Timing Belt Cover
Replacement.
Page 2 of 3
7/6/2010