Table of Contents
Advertisement
Document ID: 2097667
Caution: Use care when handling the coolant sensor. Damage to the coolant sensor will
affect the operation of the fuel control system.
1. Coat the threads on the ECT sensor with sealer.
Caution:
Refer to
2. Install the ECT sensor into the cylinder head and tighten to 17.5 N·m (13 lb ft).
3. Connect the ECT sensor connector.
4. Fill the cooling system.
5. Connect the negative battery cable.
http://localhost:9001/si/showDoc.do?docSyskey=2097667&pubCellSyskey=124321&pubO...
Fastener Caution
in the Preface section.
Page 2 of 2
7/6/2010
Hide quick links:
Advertisement
Table of Contents
