Document ID: 2097645
4. Remove the ECM mounting bracket with the bolt and the nut.
Installation Procedure
Caution:
Refer to
1. Install the ECM mounting bracket with the bolt and the nut and tighten to 12 N·m (9 lb ft).
2. Install the ECM with the nuts and tighten to 12 N·m (9 lb ft).
3. Refer to
Control Module References
http://localhost:9001/si/showDoc.do?docSyskey=2097645&pubCellSyskey=124320&pubO...
Fastener Caution
in the Preface section.
for programming and setup information.
Page 2 of 2
7/6/2010