Chevrolet Aveo 2009 Service Manual page 15

Document ID: 2097731
1. Insert the MAP sensor into the mounting bracket.
Caution: Refer to
2. Install the bolts through the MAP sensor and the bracket. Install the retaining nuts and
tighten to 8 N·m (71 lb in).
3. Install the MAP sensor and the mounting bracket to the firewall with the mounting bracket
bolt and tighten to 4 N·m (35 lb in).
4. Connect the MAP sensor connector.
5. Connect the vacuum hose to the MAP sensor.
6. Connect the negative battery cable.
http://localhost:9001/si/showDoc.do?docSyskey=2097731&pubCellSyskey=124324&pubO...
Fastener Caution in the Preface section.
Page 2 of 2
7/6/2010