Table of Contents
Advertisement
Document ID: 2097738
1. Coat the threads of the HO2S1 with an anti-seize compound, if needed.
Caution:
Refer to
2. Install the HO2S1 into the exhaust manifold and tighten to 42 N·m (31 lb ft).
3. Connect the HO2S1 connector.
4. Connect the negative battery cable.
http://localhost:9001/si/showDoc.do?docSyskey=2097738&pubCellSyskey=124325&pubO...
Fastener Caution
in the Preface section.
Page 3 of 3
7/6/2010
Hide quick links:
Advertisement
Table of Contents
