Document ID: 2097895
1. Attach the EVAP canister purge solenoid to the mounting bracket.
Caution:
Refer to
2. Install the EVAP canister purge solenoid and the mounting bracket to the intake manifold
with the bracket bolt.
Tighten
Tighten the EVAP canister purge solenoid bracket bolt to 5 N·m (44 lb in).
3. Connect the vacuum hoses to the EVAP canister purge solenoid.
4. Connect the EVAP canister purge solenoid connector.
5. Connect the negative battery cable.
http://localhost:9001/si/showDoc.do?docSyskey=2097895&pubCellSyskey=124353&pubO...
Fastener Caution
in the Preface section.
Page 2 of 2
7/6/2010