Document ID: 2097894
2. Install the fuel injectors into the fuel rail sockets with the fuel injector terminals facing
outward.
3. Install the fuel injector retainer clips onto the fuel injectors and the fuel rail ledge.
4. Make sure that the clip is parallel to the fuel injector harness connector.
5. Install the fuel rail assembly into the cylinder head.
Caution:
Refer to
6. Install the fuel rail mounting bolts.
Tighten
Tighten the fuel rail mounting bolts to 25 N·m (18 lb ft).
http://localhost:9001/si/showDoc.do?docSyskey=2097894&pubCellSyskey=124350&pubO...
Fastener Caution
in the Preface section.
Page 4 of 5
7/6/2010