Document ID: 2097894
9. Remove the fuel injector retainer clips.
10. Remove the fuel injectors by pulling down and out.
11. Discard the fuel injector O-rings.
Installation Procedure
Note: Different injectors are calibrated for different flow rates. When ordering new fuel
injectors, be certain to order the identical part number that is inscribed on the old injector.
1. Lubricate the new fuel injector O-rings with engine oil. Install the new O-rings on the fuel
injectors.
http://localhost:9001/si/showDoc.do?docSyskey=2097894&pubCellSyskey=124350&pubO...
Page 3 of 5
7/6/2010