Table of Contents
Advertisement
Document ID: 2097894
6. Remove the fuel feed line.
7. Remove the fuel rail mounting bolts.
Caution:
• Use care when servicing the fuel system components, especially the fuel injector
electrical connectors, the fuel injector tips, and the injector O-rings. Plug the inlet and
the outlet ports of the fuel rail in order to prevent contamination.
• Do not use compressed air to clean the fuel rail assembly as this may damage the fuel
rail components.
• Do not immerse the fuel rail assembly in a solvent bath in order to prevent damage to
the fuel rail assembly.
Note: If an injector becomes separated from the rail and remains in the cylinder head,
replace the injector O-ring seals and the retaining clip.
8. Remove the fuel rail with the fuel injectors attached.
http://localhost:9001/si/showDoc.do?docSyskey=2097894&pubCellSyskey=124350&pubO...
Page 2 of 5
7/6/2010
Hide quick links:
Advertisement
Table of Contents
