Print Server / Controller; Ex-I 80 / Ex 80 Print Server Option - Xerox Versant 80 Press Customer Expectation & Installation Manual

Detailed Specifications

Print Server / Controller

EX-i 80 / EX 80 Print Server Option

Introduction
The purpose of this section is to provide information about the capabilities
and potential limitations of the EX-i/EX 80 Print Server for the Xerox
Versant 80 Press.
Please see the EX-i/EX Print Server Customer Release Notes document for
the Versant® 80 Press for additional information and software usage tips.
This chart is a guide of hardware specifications matched to the Press.
Minor hardware variations within the model may occur as upgrades take
place in the manufacturing process. Any difference in the delivered
product will provide functional equivalence to the performance and
feature set described herein.
Support
Software and hardware support of your print server may vary in regions.
Refer to the Terms and Conditions for definitions for software and/or
hardware support.
Surge Protection
Xerox recommends protecting the EX-i/EX Print Server from surges or
spikes in electrical power that can damage the server and result in
extended downtime. In areas that tend to experience brownouts or
blackouts with more frequency, installation of an Uninterruptible Power
Supply (UPS) is suggested. This protection is the responsibility of the
customer.
A surge protector is strongly recommended for the network controller
installation. This should be provided by the customer.
Microsoft Windows Certificate of Authenticity (COA)
Windows® 7 Professional FES OS License is part of the EX 80 Print Server.
Every Xerox EX 80 Print Server includes Software DVDs, an individual
Windows 7 Professional Certificate of Authenticity (COA) license number
that is preprinted on a label placed on the back cover of the EX 80 Print
Server. It is the responsibility of the customer to place the booklet and all
software DVD/CDs in a secure, but accessible area. The EX 80 Print Server
System Software, Windows 7 and User Software DVDs along with the
license number might be required when performing a complete EX 80 Print
Server software installation. The Xerox Service Representative will use the
DVDs and the license in case a full system software re- installation is
recommended.
EFI may make available system updates to the operating system. These
are downloadable from the EX 80 Print Server and are customer
installable.
NOTE: If the license is lost or misplaced, the customer will be required
to purchase a replacement license at his or her own expense.
Environmental and Electrical Requirements
Refer to Electrical Requirements
detailed information.
NOTE: The EX-i/EX Print Server requires an electrical outlet.
Product Recycling and Disposal
Xerox operates a worldwide equipment take back and reuse/recycle
program. Contact your sales or service representative to determine
whether this Xerox product is part of the program. For more information
about Xerox environmental programs, visit www.xerox.com/environment.
NOTE: This product meets the RoHS standards (Restriction of Hazardous
Substances) required for products being installed in the European Union.
Space Requirements
Refer to Space Requirements/Service Space Envelope
requirements that are matched to your Xerox EX-i/EX Print Server.
Customer Expectation and Installation Guide
Microsoft®
and Environmental Requirements
for space
To enable a Service Representative to safely repair the system, the
work area must measure at least 36 inches (91.44 cm) square around
the server.
The work surface of the network controller must not infringe on the
space requirements by the print engine and any attached accessories
unless the work surface is a table that has wheels and can easily be
moved.
There must be a minimum of 78 inches (198.12 cm) clearance from
the floor to the nearest overhead obstructions.
All standard Xerox space requirements apply to this installation
including overhead, shared, aisle or hallway, and operator space. The
customer is responsible to provide appropriate floor spacing and
placement surface.
Storage and future availability of software that ships with the
color server is a customer responsibility. Xerox personnel do not
carry replacement materials.
NOTE: Power cord for the EX-i/EX Print Server is approximately
7.5 feet (2.3 meters).
Specifications
Hardware
Processors
Number of Cores
Bus Speed
Platform OS
System Memory
(Minimum)
Hard Drives Size /
RPM (Minimum)
DVD Drive
Serial Interface
USB Interfaces
(Rear, Front,
Internal)
Monitor Size
EX-i/EX Print Server
Software
Stand
Removable Hard
Drive
Electrical
BTU/Hour
for
Module Dimensions
Running Antivirus Software
The EX-i/EX Print Server has not provided testing on any specific anti-virus
software. One should refer to the Fiery Security White Paper on how best
to choose appropriate antivirus software and what settings should or
should not be enabled on the EX-i/EX Print Server.
Commercially available software programs (with the exception of Virus
Protection Software) should not be loaded onto the EX-i/EX Print Server.
Additional programs will limit the available disk space the color server
requires to operate efficiently.
Xerox Confidential
Xerox Versant® 80 Press
®
EX-i Print Server EX Print Server
Intel i5-2400, 3.1 Intel i5-2400, 3.1
GHz GHz
4 4
5.0 GT/s 5.0 GT/s
Linux Windows 7
Professional FES
2 GB 4 GB
500 GB/7200 1 TB/7200
No DVD R/W
No Yes
4 (4,2,0) 6 (4,2,0)
No Optional – 19 in/482.6
mm Flat
FS150 FS150 Pro
No Optional
No Frame is an Option:
additional drives are
ordered via the TXC
Refer to Electrical Refer to
Requirements for the Requirements for the
Print Servers Print Servers
Refer to Refer to
Environmental Environmental
Requirements Requirements
Refer to Module Refer to
Dimensions for the EX- Dimensions for the EX
i 80 Print Server 80 Print Server
Electrical
Module
8