Table of Contents
Advertisement
7.2. Procedure B
WARNING : Switch off the turbine and shaping air.
7.2.1. Bellcup
• Remove the bellcup using the appropriate tool.
• Leave to soak in solvent for one hour then clean with a clean cloth and soft brush.
WARNING : Make sure that all surfaces are clean and free from impurities. Take care particu-
larly of the internal and external surfaces of the cylinder of the bellcup fixing.
Solvent
• Dry carefully the two faces of the bellcup with compressed air.
Index revision : F - November 2017
32
7012
Advertisement
Table of Contents
