Diagram Of The Various Fluid Circuits; Paint Diagram; Bellcup And Injector Rinsing Diagrams; Microphone Air Diagram - SAMES KREMLIN PPH 308 User Manual

4. Diagram of the various fluid circuits

4.1. Paint diagram

41
53
11
51
Note: The PTFE hoses should never be replaced by polyamide hoses.

4.2. Bellcup and injector rinsing diagrams

56
PV32
32
32
36
PV31
58
31 31
WARNING : The rinsing cycle must end with a compressed air sequence, circuits 31,32 and 36
must be purged and dried before restarting the high voltage.

4.3. Microphone air diagram

Index revision : F - November 2017
11 Paint supply - Ø 4 x 6 PTFE
Dump - Ø 4 x 6 PTFE on 1,5 m then
41
Ø 7 x 10
51 Paint supply pilot - Ø 2,7 x 4
53 Dump pilot - Ø 2,7 x 4
N.B. All hoses are made of polyamide, except:
11-41 which are in PTFE, dimensions in mm.
Bellcup rinsing solvent / air - Ø 2,7 x 4
31
PTFE
Injector rinsing solvent / air - Ø 2,7 x 4
32
PTFE
Injector rinsing solvent / air pilot - Ø 2,7
56
x 4
Commande solvant/ air rinçage exté-
58
rieur bol - Ø 2,7 x 4
N.B. All hoses are made of polyamide, except:
31-32 which are in PTFE, dimensions in mm.
26 Microphone air - Ø 4 x 6
43 Microphone return - Ø 4 x 6
N.B. All hoses are made of polyamide, dimen-
sions in mm.
22 7012