Overview - Anton Sprint eVo User Manual

Sprint eVo 1 /eVo 2 /eVo 3

Overview

Soft keys
Use these unmarked buttons
to make selections from the
menu, start and stop tests,
print and store results.
See section Operation for more
details
ESCAPE key
Use this button to quit
tests and step back
through menus.
2
Pressure inlets (eVo
3
and eVo only)
(-) (+)
Flue sample inlet
IR window
Printer output, senses ambient light to
control backlight.
Tip: to quickly activate backlight, cover this window
3
Note: eVo has Bluetooth
®
A
NTON
Tel: +44 (0) 870 428 0075
Fax: +44 (0) 870 428 0076
sales@anton-group.com
www.anton-group.com
Anton Group
Tel: +44 (0) 870 428 0075
V2.2 i1.05
Thermocouple
sockets
K-type connectors
communications
Overview
Display
Showing start-up
splash screen
Battery icon
Three bars show
complete charge
Purge icon
Rotating icon shows
pump is purging
ON/OFF/ENTER key
Press and hold button for two
seconds to switch on and switch
off Sprint unit. Use this key to
finish edits, save changes and
view next page of multiple
paged screens.
Power jack
USB connector
Connect gas leak
probe here.
Also used for
communications to PC
2 3
(eVo and eVo only)
Exhaust exit
Warning: do not
inhale exit gas exhaust
or block exit
3