Anton Sprint eVo User Manual page 19

Sprint eVo 1 /eVo 2 /eVo 3
To disable Auto off timeout press – key until 'disabled' is displayed.
Back light
The back light can be set to four options: off, dim, bright or controlled. Use the
soft keys to scroll and select the option desired. Press the
change or ESC to cancel.
Back light options are:
Off: switches the backlight off
Dim: lowers the light intensity
Bright: increases the light intensity
Controlled: Sprint monitors the ambient light level and adjusts the light
intensity accordingly.
Reports (eVo 3 only)
Allows selection of Printer (IR comms) or Bluetooth
between these and the
Key click
The Key click settings allows you to enable or disable the key pad from making
audible 'clicks' when pressed. Use the soft keys to select 'enabled' or 'disabled'
from the submenu. Press the
Supervisor settings
Set date &time
On the Time & Date screen the current time and date are shown. Use the soft
keys – and + to alter the values of hours, minutes, day, month and year. Use the
key to select each unit. Press the ESC key to accept the change.
è
Edit report header
é
Use the soft keys and
– +
Press key to edit text. The screen displays the character lists and highlights
the current list in use. Use the
ues in each list and
è
character lists are shown below.
Press ON/OFF/ENTER to delete characters to the right. Press
sor to the end of the text and
header screen.
Print Calibration Due
Enable or disable printing of calibration due on reports.
CO Alarm
During flue gas analysis, a carbon monoxide alarm can be set to activate at
300ppm of CO or disabled.
key to accept.
þ
key to accept the change or ESC to cancel.
þ
to select the report header text line one or two.
ê
and keys to scroll through character val-
to move on to the next letter in the header text. The
to accept change and return to Edit report
þ
Setting up
key to accept the
þ
. Use the soft keys to toggle
®
to move the cur-
è
17