Anton Sprint eVo User Manual page 12

Performing tests
Stabilisation
14:44:27 08-Feb-2006
Start P3
mBar
Finish P4
mBar
Diff press
mBar
Duration 00:00
Screen 1
You may repeat the test by pressing the key
results).
Tightness Test
1. Press the soft key
the screen.
2. To stop test press the soft key
Screen 1
3. Press the soft key
You may fail the test by pressing the key
At the end of the tightness test you can log or print the results. Press the ESC
key to return to Press Menu.
Press ESC again to return to Test Menu.
3. Pressure, Differential Pressure, Working Pressure and
Operating Pressure tests (eVo
Before carrying out the test the pressure must be zeroed with the tubes con-
nected to the instrument but not the pressure source. A thermocouple may be
connected to provide temperature readings in these tests.
10
Stabilisation
14:44:27
08-Feb-2006
0.0 Start P3
0.0
mBar
0.0 Finish P4 0.0
mBar
Diff press
0.0
0.0
mBar
Duration 00:25
P=0
Screen 2
to start test. Sprint displays the duration time on
u
.

Screen 2
to pass test.
ü
2
Sprint eVo 1 /eVo 2 /eVo 3
Stabilisation
14:44:27
08-Feb-2006
Start P3
0.0
mBar
Finish P4 0.0
mBar
Diff press
0.0
mBar
Duration 00:54
Stabilised?
Screen 3
(you can print the
û
Screen 3 Screen 4
to indicate test has failed.
û
3
and eVo only)