Safety Information - Anton Sprint eVo User Manual

Summary of Screen Icons
þ
Select, pick or action
é
Up item or entry
ê
Down item or entry
ç
Left field
è
Right field
Zero pressure
P=0
u
Start
(Pressure & CO Room Safety tests)
Stop

(Pressure & CO Room Safety tests)
¢tt
Restart
(Restart timer)
ü
Yes, pass or done
û
No or fail or cancel
Purge icon
Hold / pause readings
Select temp 1 (flow)
T1
T2
(Differential Temperature test)
Select temp 2 (return)
T1
T2
(Differential Temperature test)
< Save log
Print
Send XML report to Bluetooth
(eVo 3 only)
Serial communications with PC in pro-
gress – please wait
Delete
>
Darker contrast
>
Lighter contrast
– –
Restore default contrast
– +
Edit value
+
Increment value
–
Decrement value
Decrement through character list
(String edit)
Increment through character list
(String edit)
Logging busy
CO Alarm
η
Select Net/Gross/NetHE Efficiency
Bluetooth
® is a trademark owned by Bluetooth SIG, Inc.
and licensed to Crowcon Detection Instruments Ltd

Safety information:

•
Read and understand all instructions in the operation
section of this manual before use.
•
Do not substitute components as this may impair safety
and invalidate warranty.
•
Observe all warnings and instructions marked on the
unit and within this manual.
•
If this product is not working properly, read the trouble-
shooting guide or call Anton.
•
Ensure qualified service personnel change sensors and
provide maintenance and calibration.
Additional information:
Sprint is designed to support the working practices defined
in British Standard BS7967 and the Design Standards
EN50379, BS7927 for flue gas analysers. It is highly
recommended that users are fully conversant with BS7967
when using a flue gas analyser for servicing or installing a
boiler system.
Sprint offers a timed let-by/tightness test in accordance
with the UK's Institute of Gas Engineers' procedure IGE/11/
UP/1B.
Performing CO measurements
When performing any CO measurements ensure the unit
is zeroed in clean air in accordance with British Standard
BS7967. A suitable location for sampling clean air will be
outside of the building where the boiler system is installed.
1.
Repair of this equipment and gas sensor replacement
shall be carried out by the manufacturer or certified
®
service centre in accordance with the applicable code
of practice.
2.
If the equipment is likely to come into contact with
aggressive substances, then it is the responsibility of the
user to take suitable precautions that prevent it from
being adversely affected.
3
. The equipment is designed for use in ambient tempera-
tures in the range -10°C to +50°C and should not be
used outside this range
4. Use only charger(s) supplied by Telegan/Anton.
5.
Use only the appropriate Telegan/Anton supplied cables
for connection to the sockets on the instrument.
© Copyright Telegan Gas Monitoring 2012.
All rights are reserved. No part of the document may be photo-
copied, reproduced, or translated to another language without the
prior written consent of Telegan Gas Monitoring
Publication number: M071021
First edition: July 2012