ITM-CIT installation and NE provisioning
...................................................................................................................................................................................................................................
Confirm/Update the MIB
Overview
A MIB confirmation should be performed during node creation or in any other situation
where the MIB status is "Filled, not confirmed".
Before you begin
Before confirming or updating the MIB, determine the following:
• Performing a MIB confirmation will cause the E to reset. A new login, after waiting
several minutes for the reset to take place, will have to be performed.
• Confirming the MIB for an existing E can result in traffic disruptions.
Procedure
Proceed as follows to confirm the MIB of a E:
...................................................................................................................................................................................................
Select
1
Result:
update of a E MIB.
CAUTIO : Confirming the MIB will result in an E reset. The current login session
will be terminated. Also, while overwriting the older MIB, traffic can be affected.
...................................................................................................................................................................................................
Click
2
Confirm MIB
Result:
...................................................................................................................................................................................................
3
Click
Yes
Result:
minutes. During this time, the connection between the ITM-CIT and the E will be
lost. To re-establish this connection, a login must once again be performed after
waiting for the operation to complete.
...................................................................................................................................................................................................
Login again.
4
...................................................................................................................................................................................................
5
Select
Result:
viewed. It should now be Filled.
...................................................................................................................................................................................................
Click
6
Close
...................................................................................................................................................................................................................................
6-22
Management → Node Details
The ode Details window appears. This window allows confirmation or
.
A confirmation window appears.
.
The operation will be started. Confirming the MIB should take several
Management → Node Details
The ode Details window appears. In this window, the MIB state can be
.
Proprietary – Use pursuant to Company instruction
.
.
Alcatel-Lucent – Internal
Provisioning system parameters
Confirm/Update the MIB
365-313-103R8.0
Issue 2 July 2009