Cable assembly instructions
...................................................................................................................................................................................................................................
SUB-D connector
Description
The amphenol metallic hoods for SUB-D connectors protect cable assemblies from
magnetic and radio interferences.
These hoods are easily assembled and suitable for all industrial and telecom applications.
Assembly instructions
Please observe the following SUB-D assembly instructions:
...................................................................................................................................................................................................
1
Important! Protect the braid by stripping.
Strip the cable as necessary.
...................................................................................................................................................................................................
2
Prepare the braid as shown in
...................................................................................................................................................................................................
Solder the wires to the pin contacts.
3
...................................................................................................................................................................................................
4
Put the ferrules around the braid on the cable.
Important! Shape the strands of braid into two pigtails and bend these pigtails back
180 degrees over the ferrule.
...................................................................................................................................................................................................
Insert the cable with the ferrule into the SUB-D connector.
5
...................................................................................................................................................................................................
6
Close the connector by tightening the screws.
E
N D
O F
...................................................................................................................................................................................................
...................................................................................................................................................................................................................................
C-2
Figure C-1, "SUB-D assembly steps" (p.
S T E P S
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
SUB-D connector
C-3).
365-313-103R8.0
Issue 2 July 2009