Using Vehicle Battery Power; Antenna - Radio Shack PRO-96 Owner's Manual

CAUTIONS
• You must use a
Class 2 power
source that supplies
9V DC and delivers
at least 300 mA. Its
center tip must be
set to positive and its
plug must fit the
scanner's PWR DC
9V jack. Using an
adapter that does
not meet these
specifications could
damage the scanner
or the adapter.
• You must use a
Class 2 power
source that supplies
9V DC and delivers
at least 300 mA. Its
center tip must be
set to positive and its
plug must fit the
scanner's PWR DC
9V jack. Using an
adapter that does
not meet these
specifications could
damage the scanner
or the adapter.
28
1. Connect the Adaptaplug™ to
the adapter's cord with the tip
set to positive.
2. Plug the adapter's barrel plug
into the scanner's
jack.
3. Plug the adapter's two-prong
plug into an AC outlet.
U V
SING EHICLE
P
OWER
You can power the scanner from a
vehicle's 12V power source (such
as cigarette-lighter socket) using a
9V, 300 mA DC adapter and a size
C Adaptaplug™ adapter (neither
supplied). Both are available at
your local RadioShack store.
1. Connect the Adaptaplug™ to
the adapter's cord with the tip
set to positive.
2. Plug the adapter's barrel plug
into the scanner's
jack.
3. Plug the adapter's cigarette-
lighter plug into your 12V
power source.
If the scanner does not operate
properly when you connect a DC
adapter, unplug the DC adapter
from the power source and clean
the socket, or check the adapter's
internal fuse.
A
NTENNA
Connecting the Supplied

Antenna

To attach the supplied flexible
antenna to the antenna jack on the
PWR DC 9V
B
ATTERY
PWR DC 9V