Changing The Receive Mode - Radio Shack PRO-96 Owner's Manual

2. Select the search bank in
which you want to clear all
locked-out frequencies.
3. Press and then press
FUNC
. Lockout list appears in
L/OUT
the scanner's display.
4. Press and then
FUNC
scanner will display
list clear? 1=YES Press other key
for NO
. Press to clear all
1
locked-out frequencies.
List cleared
appears for about
2 seconds. Press any key
other than to cancel clear.
1
C
HANGING THE
MODE
The scanner defaults to the
commonly used AM or FM/Digital
receive mode for each frequency
range. The preset mode is correct
in most cases. However, some
amateur radio transmissions and
trunked systems do not operate in
the preset mode. If you try to listen
to a transmission when the
scanner is not set to the correct
receive mode, the transmission
might sound weak or distorted.
To change the receive mode,
repeatedly press
MODE
receive mode changes as follows:
AM – configures the channel for
AM mode.
FM/DIGITAL– configures the
channel for the FM/DIGITAL
mode.
CT – configures the channel for
CTCSS mode.
. The
6
Confirm
R
ECEIVE
. The
69