Radio Shack PRO-96 Owner's Manual page 87

on/off state of the sub-bank
will appear in the scanner's
display.
Follow these steps to turn the ID
sub-bank on or off during the scan
mode:
1. The channel storage bank
must be set to Closed Mode
to change the state of a sub-
bank while scanning.
2. Press and then
FUNC
while the scanner is stopped
on a voice channel
transmission. The bank text
display is replaced with a sub-
bank status display,
01234
. The flashing cursor will
indicate the current active
sub-bank.
3. Press and the number
FUNC
of the sub-bank you wish to
turn on or off (0-4). For
example, to toggle sub-bank 4
on or off, press
Open and Closed Mode
Operation
You can set your scanner to
change the way it receives
transmissions on Motorola,
APCO-25 and EDACS trunked
radio systems. These settings,
called Open Mode and Closed
Mode, control whether the scanner
monitors all traffic from a trunked
radio system, or only traffic from
talkgroups you specify. Unlike the
channel mode settings described
above, Open/Close mode settings
apply to a trunking system
programmed into a single bank.
TRUNK
T IDbk
, then .
FUNC 4
In Open Mode, you hear
all active talkgroups
except those you
specifically exclude,
making it easy to hear
everything going on. In
Closed Mode, you hear
only those talkgroups
you specify. This makes
it easy to listen only to
Ô
talkgroups you are
interested in and exclude
others
Ô Ô
NOTE
87