Radio Shack PRO-96 Owner's Manual page 76

P708•••D•+CT
Welcome Ln-4
_
76
can be saved to one of the ten V-
Scanner folders, or the scratchpad
folder. When you save working
memory to a V-Scanner folder, all
settings contained in working
memory are saved, including
channels, talkgroups, lockout
status, contrast settings, etc.
Previously saved V-Scanner
folders can be recalled and loaded
into working memory. You can
also erase the contents of V-
Scanner folders, or move the
contents of one folder to another
using working memory. V-Scanner
folder names are stored in Line 4
from the Welcome screen that
appears when you first power on
the scanner. You can change the
contents of line 4 from the current
working memory configuration.
This information is saved when
you store the V-Scanner.
Follow these steps to edit the V-
Scanner name stored in Line 4 of
the Welcome screen:
1. Press
PGM
2. Press ,
FUNC TEXT
scanner will display the Line 4
edit screen with a flashing
cursor:
3. Use standard text entry
procedures to enter a V-
Scanner name, up to 12
characters long. Press
when finished. Refer to the
"Text Input Chart" on Page 48
for more information on text
entry.
You can only change the name of
a V-Scanner while it is loaded into
. The
ENTER