Table of Contents
Advertisement
perform an operation using the
keypad.
In Ignore mode, the backlight
functions as described in
Keypress mode, except that the
scanner ignores the first keypress.
This mode is useful when you wish
to quickly illuminate the display
and keypad without having to
7
search for the
key. The first
keypress is ignored, and the
scanner sounds the low pitched
error beep to remind you that the
first key pressed to activate the
backlight is ignored by the
scanner.
In any backlight mode, you can
7
press and hold
for about 1
second to force the backlight on
7
full time. Press
while the
backlight is on to turn it off.
You can also change the backlight
mode and duration.
1. If the scanner is on, turn it off
and back on again.
To Digital Trunking
the scanner's display.
Welcome To Digital
2. While
Trunking
appears, press
.
LIGHT
3. Press
or
to select the
desired backlight mode and
duration. Selecting 3, 5, 10 or
20 sets the backlight mode for
normal operation for the
selected duration. Selecting
K3, K5, K10 or K20 sets the
backlight mode for Keypress
operation for the selected
duration. Selecting I3, I5, I10
or I20 sets the backlight mode
Welcome
appears in
73
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
