Cloning The Programmed Data - Radio Shack PRO-96 Owner's Manual

Ô Ô
NOTES
Using the Digital
AGC Function
• Digital AGC has no
effect on analog
transmissions.
• You may notice more
background noise
with Digital AGC on.
Cloning the
Programmed Data
CLONE MODE Incorrect
Model
appears if the
scanner receives data
from another scanner
other than a PRO-96.
82
can result in a low level audio
signal if a user on the system is
not speaking close enough to their
radio microphone.
Your PRO-96 features Digital
AGC, which can compensate for
these low audio levels when they
occur. By default, Digital AGC is
turned on. If desired, you can
toggle the Digital AGC function on
or off by pressing
FUNC
at any time. The display will
MAN
DSP AGC Off
briefly show
DSP AGC On
accordingly.
C
LONING THE
P
ROGRAMMED
You can transfer the contents of
the current scanner working
memory to and from another
PRO-96 scanner using an optional
connecting cable with
mm) phone plugs on both ends
(use Radio Shack part number
42-2420 available at your local
RadioShack store), or to a
computer application designed to
work with this scanner using a PC
interface cable (use Radio Shack
part number 20-289, available at
your local RadioShack store).
Follow these steps to clone the
data.
1. Turn on both scanners.
2. Connect the connecting cable
to each scanner's PC/IF jack.
CLONE MODE UP to send, remove
cable to exit
appears in the
scanner's display.
Confirm send data?
3. Press .
1=YES Press other key for NO.
, and then
or
Ô
D
ATA
1
/ -inch (3.5
8
Ô