Scanning The Talk Group Id Lists; Deleting A Stored Talk Group Id List; Priority Talk Group Id Scanning - Radio Shack PRO-94 Owner's Manual

2. Select the ID scan list location where you want to
store the IDs, then press
3. Press
MON/CLR
4. Press . The scanner stores the IDs into the
E
selected ID scan list.

Scanning the Talk Group ID Lists

Press to begin scanning the lists you have stored.
SCAN
Note: If one or more of the IDs you stored are incorrect,
Error flashes twice and the scanner beeps several
times, then the scan list numbers appear at the top of the
display. To correct the entry, delete at least one of the in-
correct IDs (see "Deleting a Stored Talk Group ID List").
To remove a scan list from active scanning, use the
number keys to enter the scan list's number. The scan
list number turns off, and the IDs in that list are not
scanned.
Note: One of the five scan lists must always be active.
You cannot remove all of them.
To restore a scan list to active scanning, use the number
keys to enter the number of the list again.
Press to return to the previously selected function.
SRC

Deleting a Stored Talk Group ID List

1. Press
PROG
2. Repeatedly press
ID list location (shown at the top of the display) you
want to delete.
3. Press then
0

Priority Talk Group ID Scanning

You can assign a priority to a favorite ID so during scan-
ning the scanner checks that ID more frequently than the
others in the list. Each of the five memory locations re-
50
. A monitor ID appears.
. PGM appears.
8 8 8 8
or
.
E
Trunking Operation
. appears.
PGM
PROG
9 9 9 9
to select the talk group