Preparation; Using Internal Batteries; Using Non-Rechargeable Batteries - Radio Shack PRO-94 Owner's Manual

ˆ

Preparation

You can power your scanner from any of three sources:
• internal batteries (not supplied)
• standard AC power (using an optional AC adapter)
• vehicle battery power (using an optional DC
adapter)

USING INTERNAL BATTERIES

You can power your scanner using four alkaline, lithium,
or rechargeable (Ni-Cd or Ni-MH) AA batteries (not sup-
plied). For the best performance and longest life, we rec-
ommend RadioShack batteries.

Using Non-Rechargeable Batteries

Follow these steps to install non-rechargeable batteries.
1. Turn
VOLUME/OFF
make sure the power is turned off.
2. Slide up and hold the tab on the back of the scan-
ner, then pull up the battery compartment cover
from the top edge.
10
counterclockwise until it clicks to
Preparation