Setting Squelch For The Trunking Mode; Storing Trunked Frequencies - Radio Shack PRO-94 Owner's Manual

To scan both trunking and conventional banks, select
the banks you wish to be active with trunking off, then
press . The scanner begins scanning. To return
TRUNK
to conventional scanning, press
SETTING SQUELCH FOR THE
TRUNKING MODE
Your scanner's squelch setting is automatically adjusted
during trunking, which means it is not necessary to man-
ually adjust squelch while scanning trunked transmis-
sions. However, the squelch setting can affect how fast
your scanner acquires the data channel, and, in some in-
stances, can prevent your scanner from acquiring the
data channel at all.
We recommend you set
selecting a trunked bank.
Note: Change this setting as needed for the best perfor-
mance in your area.

STORING TRUNKED FREQUENCIES

Follow these steps to select, program, and store trunked
frequencies.
1. Press
PROG
or more bank numbers flash.
2. Press the number key (1–10) of the desired target
storage bank. Select one of the trunk systems by
repeatedly pressing
system type, then press
automatically selects the first channel in the
selected bank.
Note: You can select from the following six systems:
You See
E1
Ed
E2 – 800
40
SQUELCH
then
TRUNK
8 8 8 8
Trunk System
Motorola Type I, 800 MHz frequencies
EDACS frequencies
Motorola Type II, 800 MHz frequencies
Trunking Operation
again.
TRUNK
fully clockwise before
. TRUNK appears and one
9 9 9 9
or to select a trunking
. The scanner then
E (SVC)