Radio Shack PRO-94 Owner's Manual page 21

DATA — appears when the data skip function is active;
appears when the disconnect tone detect function is off
in the trunking mode.
— appears when you scan channels.
SCAN
— appears with numbers (
LIST
Numbers with a bar under them show which ID scan list
banks are turned on for scanning.
— appears during limit, direct, service, and ID
SEARCH
searches, and blinks when you monitor IDs.
PRI — appears when the priority feature is turned on.
HOLD — appears during limit, direct, service, and ID
searches, and ID monitor holds; flashes while the scan-
ner is temporarily monitoring a programmed ID.
— appears when you select a delay.
DLY
— appears when you manually select a channel
L/O
you locked out.
(keylock) — appears when you lock the keypad.
K/L
Error — appears when you make an entry error.
— alerts you when the battery power gets low.
BATT Lo
MON — appears during search modes, ID search moni-
tor, program ID monitor, or when you select a monitor
memory. The number to the right of this indicator shows
the current monitor memory.
— appears when you press
MAN
channel number or frequency.
— appears while you store a frequency into a chan-
PGM
nel, while you enter a frequency range during a limit
search, or when you program trunking frequencies, fleet
maps, or ID memories while trunking.
HYPER — appears while Hyperscan or Hypersearch is
active during a direct or limit search.
8 8 8 8 9 9 9 9
or — appears during a limit, direct, or service
search, indicating the search direction.
About Your Scanner
– ) during trunking.
1 5
to directly enter a
MAN
21