Searching For Talk Group Ids; Saving A Talk Group Id - Radio Shack Pro-164 Manual

Searching for Talk Group IDs

If.you.tune.the.scanner.to.an.active.Motorola.
control.channel,.the.Motorola.System.ID.and.
the.approximate.control.channel.message.
decode.success.rate.appears..This.helps.you.
identify.the.system.and.the.reception.quality..
When.the.scanner.decodes.control.channel.data.
from.a.Motorola.system,.COTRL.appears.on.the.
display..
To search for Talk Group IDs:
1.. Set.the.bank.to.Open.mode.
2.. Press.SCAN..The.scanner.scans.through.all.
unlocked.channels.in.the.active.banks.
3.. When.the.scanner.stops.on.a.transmission,.
press.TRUNK..The.scanner.displays.the.ID.
location:
Sub-bank.
0-4
If the ID has already been saved, "ID was
saved" appears.
If you try to store more than 150 talk
group IDs in a bank, "Memory Full!"
appears.

Saving a Talk Group ID

Each.of.the.10.banks.contains.5.sub-banks.that.
each.hold.30.Talk.Group.IDs..(You.can.save.up.
to.1,500.Talk.Group.IDs.).When.the.scanner.
receives.a.trunked.transmission,.it.searches.
the.associated.sub-bank.for.the.Talk.Group.
ID.to.decode.data.for.Motorola,.EDACS.(GE/
Ericsson),.and.LTR.(EF.Johnson).systems..
ID.Location
00-29
Example:.2-01

To define a Talk G
1.. Press.PGM,.th
ID.program.m
2.. Press.FUNC,.
bank..
3.. Repeatedly.p
mode.(Motor
4.. Repeatedly.p
bank.
5.. Press..or.
store.the.Talk
6
.. Use.the.numb
enter.the.Talk
.
For.ED.Talk.G
a.decimal.or.A
is.decimal.ID.
.
To.use.the.AF
"AFS.Format"
You.can.then.
.
If.you.make.a
appears.when
Step.3.
. If.you.entered
in.same.bank
To.store.the.ID
press.CL.
7.. Press.ENT..
For informa
a Talk Grou
44.
Deleting Tal
You.can.delete.an
Talk.Group.IDs.in