Service Bank Search - Radio Shack PRO-94 Owner's Manual

1. Press
MAN
2. Enter the frequency you want to start from using the
number keys. (Press
Notes:
• To start the search from a frequency already
stored in one of your scanner's channels, press
or
MAN
enter the channel number and then press
PROG
• If you enter an invalid frequency, the scanner dis-
plays Error.
9 9 9 9
3. Press
the selected frequency.
9 9 9 9
appear.
4. When the scanner stops on a transmission, quickly
press either:
to stop searching and listen to the transmis-
HOLD
sion.
HOLD
MON/CLR
current monitor memory.
5. To release the hold and continue searching, press
or hold down
HOLD
Or, if you did not press
9 9 9 9
to continue searching.
Note: To step through the frequencies while
appears, press

Service Bank Search

You can search for weather, ham, marine, aircraft, or po-
lice (fire/emergency) transmissions without knowing the
specific frequencies used in your area. The scanner is
preprogrammed with all the frequencies allocated to
these services. To use this feature, press
appears and the scanner searches starting
SEARCH
with the weather service bank. To select a different ser-
.
•
. Then use the number keys to
PROG
again.
Press
to search down or
appears.
to store the displayed frequency into the
8 8 8 8
8 8 8 8 9 9 9 9
or
Operation
to enter a decimal point).
MON/CLR (•)
8 8 8 8
to search up from
,
-d- SEARCH
9 9 9 9
or for at least 1 second.
, simply press
HOLD
.
or
MAN
.
8 8 8 8
, and or
8 8 8 8
or
HOLD
(
SVC E
27
).