Care And Maintenance - Radio Shack PRO-94 Owner's Manual

1. Turn off the scanner.
2. While holding down
flashes for about 5 seconds as the scanner
CLEAR
clears its memory.
Note: Do not turn off the scanner again until
stops flashing. Otherwise, the scanner might not clear its
memory properly.
ˆ

Care and Maintenance

Your RadioShack 1000-Channel Handheld Trunking
Scanner is an example of superior design and crafts-
manship. The following suggestions will help you care
for your scanner so you can enjoy it for years.
Keep the scanner dry. If it gets wet, wipe
it dry immediately. Liquids might contain
minerals that can corrode the electronic
circuits.
Use and store the scanner only in normal
temperature environments. Temperature
extremes can shorten the life of electronic
devices, damage batteries, and distort or
melt plastic parts.
Keep the scanner away from dust and
dirt, which can cause premature wear of
parts.
Handle the scanner gently and carefully.
Dropping it can damage circuit boards
and cases and can cause the scanner to
work improperly.
Use only fresh batteries of the required
size and recommended type. Batteries
can leak chemicals that damage your
scanner's electronic parts.
Wipe the scanner with a damp cloth occa-
sionally to keep it looking new. Do not use
harsh chemicals, cleaning solvents, or
strong detergents to clean the scanner.
and
2
Care and Maintenance
, turn on the scanner.
9
CLEAR
69