Item Button - AEMC OX 5022-CK Quick Start User Manual

ITEM BUTTON
1
2
3
4
5
6
7
8
Shop for AEMC products online at:
OPERATINg MODE BUTTONS
Press these buttons to select the desired operating mode:
- Oscilloscope
- Multimeter
- Harmonic analyzer
NAVIgATION BUTTONS
Use these navigation buttons to move around the menus and dialog boxes:
VERTICAL
- Vertical movement and automatic selection in the secondary menus
- Adjustment of values in the main menus
- Vertical movement in a dialog box
HORIZONTAL
- Horizontal movement through the main menus
- Adjustment of values in the secondary menus
- Horizontal movement in a dialog box
ENTER
- Opens a dialog box from a main menu or a secondary menu
- Validation of the items in a dialog box
3 CHANNEL A, B
- A single press selects channel A (or B) and shows the corresponding menu.
- Pressing twice deselects the channel.
MATH/MEMORy BUTTONS
- A single press selects channel M (Math) and shows the corresponding
menu.
- Pressing twice deselects the channel.
NOTE: For the M (memory) channel, pressing twice invalidates the channel.
Pressing once again selects the Math channel, the memory is lost and must be
reloaded.
ON/OFF BUTTON
- The instrument is turned ON by a short press on this button. It is turned
OFF by a long press (a shutdown message appears and a beep sounds).
FUNCTION BUTTONS
- Auto Set: Performs an automatic adjustment on channels A and B. The
success of each vertical autoset conditions the activation of the channel.
- Run Hold: Starts or stops an acquisition.
CHARgE STATUS
- Battery Charge LED
OPTICAL COMMUNICATOR
- Provides the communication between the oscilloscope and a PC.
TIME BASE BUTTONS
- increases the time base for acquisition up to 200 s.
- decreases the time base for acquisition down to 25 ns.
ShopAEMC
www.
DESCRIPTION
.com 1.877.766.5412