Table of Contents
Advertisement
SECTION 4: OPERATIONS
Operation Overview
The purpose of this overview is to provide the nov-
ice machine operator with a basic understanding
of how the machine is used during operation, so
the machine controls/components discussed later
in this manual are easier to understand.
Due to the generic nature of this overview, it is
not intended to be an instructional guide. To learn
more about specific operations, read this entire
manual, seek additional training from experienced
machine operators, and do additional research
outside of this manual by reading "how-to" books,
trade magazines, or websites.
To reduce your risk of
serious injury, read this
entire
using machine.
To reduce risk of eye injury from flying
chips or lung damage from breathing dust,
always wear safety glasses and a respirator
when operating this machine.
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
-26-
manual
BEFORE
To complete a typical operation, the operator
does the following:
1.
Examines workpiece to make sure it is suit-
able for milling.
2.
Positions table according to operation and
size of workpiece.
3.
Firmly clamps workpiece to table or a mill
vise.
4.
Installs correct cutting tool for operation.
5.
Uses manual downfeed and table controls to
correctly position cutting tool and workpiece
for operation.
6.
G0802 Only: If X-axis power feed will be used
during operation, operator confirms speed
and length of table movement required, and
sets limit stops accordingly.
7.
Configures mill for correct spindle speed.
8.
Puts on required safety glasses and face
shield, and makes sure workpiece and table
are clear of all tools, cords, and other items.
9.
Selects spindle direction, then turns mill ON,
and performs operation.
10. Turns mill OFF.
Model G0801/G0802 (Mfd. Since 09/15)
Advertisement
Table of Contents
