Axminster HBS200N Manual page 23

The skip tooth is provided on coarse tooth blades,
those with 3, 4 and 6 teeth per inch; it has a wide
shallow gullet with plenty of space for waste to
collect. Please note that the quality of the cut can be
adversely affected by sawdust packing between the
teeth.
The regular, or triangular, tooth form is provided on
blades with 10 or more teeth per inch where, because
of the reduced material removal, there is less need for
waste storage.
Premium Bandsaw Blades
•Premium blades made from M42 with 8% cobalt.
• Long life with high resistance to heat, abrasion and
vibration.
• Variable pitch teeth for wider ranging applications.
• Also used for cutting metal on horizontal bandsaws
Blades are available in three variable pitch forms
4-6tpi, 6-10tpi and 10-14tpi.
High Carbon Bandsaw Blades
• General purpose range of blades for wood and
metal cutting.
• Comprehensive range of lengths widths and tooth
configuration.
• Hardened and long lasting teeth.
Ground Tooth Bandsaw Blades
• Diamond ground teeth staying sharper for at least
30% longer.
• Smoother cut over general purpose milled tooth
blades.
• Comprehensive range of lengths, widths and tooth
configuration.
Back Tooth Bandsaw Blades
• Specifically designed for curve cutting so ideal for
wood turners.
• Back tooth design allows better clearance and
tighter curves.
Bandsaw Blade Information
• Available in one width of 5/16" (8mm) x 4 tpi.
23
4-6tpi
6-10tpi
10-14tpi