Lock Inspection Systems MET 30+ Operating Manual page 52

Doc. Ref.No: Q875-0143/ENG Issue 2 12/01/10
Met 30+ Operating Manual
The full screen keyboard, shown in the figure, can be used to edit an existing product
name. On the bottom row of keys, use the [ ] , [ ] keys to type Upper and Lower
U L
case letters, and use the [ ] key for special characters. (Pressing each of these
S
keys changes the characters displayed on the keyboard.) To amend the name, move
to the left or right with the [ ] and [ ] keys. Press the [ ] key to store the name
< >
M
and return to the ADC display.
9.1.2.7 Select Frequency (F) (Met 30+3F only) :
The frequency can be changed to Low, Medium or High by pressing [+] or [-] keys.
File Name: Q875-0143 ENG Iss2 Met30+ Operating.doc Page 50 of 58