Engineering Setup - Lock Inspection Systems MET 30+ Operating Manual

Doc. Ref.No: Q875-0143/ENG
Format: {time-stamp} Fault - BELT STOPPED

8.3 Engineering Setup

Using the engineer's menu, the engineer should set up the following
8.3.1 Communication Setup
Select Port A
9600 baud
N parity
8 8 data bits
H Handshaking (Some records may be lost if not set)
8.3.2 Printer Setup
Select 'Printing on Demand' or 'Printing on Event' as required.
Select 80 column for the Epson printer.
Select 40C for the Martel printer.
File Name: Q875-0143 ENG Iss2 Met30+ Operating.doc
Issue 2
Met 30+ Operating Manual
12/01/10
Page 43 of 58