Engineers Menu - Lock Inspection Systems MET 30+ Operating Manual

Doc. Ref.No: Q875-0143/ENG
5.4.7.6 Switch Frequency (F) : Menu only available on 3f
The frequency can be changed to Low, Medium and High using the
5.4.7.7 Exit (x) :
Selecting the 'x' option returns to the supervisor menu.
5.4.8 Delete Product (D) :
On entering this option you will be asked which product setup to erase:
The / keys scroll through the list of products that can be deleted. Note that the
TEST SETUP cannot be deleted.
When the product to be deleted has been chosen, press SELECT. Confirmation will
be asked for. If "NO" is selected then no action is taken and the option is exited. If
the current product is deleted the detector will switch to running the TEST SETUP.
5.4.9 Operator's Code (o)
This allows the operator's access code to be changed, the
number and the SELECT key sets it. The new code will over-write the old one.
5.4.10 Engineering Setup (e) :
Can only be entered by using the Engineer security code.
5.4.11 Exit (x) :
Exit the Supervisor menu and returns to the Bargraph.

5.5 Engineers Menu

When the engineer's code is entered the supervisor menu is displayed. All options
are available except the Lock Engineer. Selecting 'e' enters the menu.
File Name: Q875-0143 ENG Iss2 Met30+ Operating.doc
Issue 2
Met 30+ Operating Manual
Switch frequency
Low
Erase product: 1
PILLS
ScvTCPselx
Engineering displays
12/01/10
/ keys.
and keys select each
Page 25 of 58