Rs232 Pc Serial Interface - Lutron Electronics CM-9930R Operation Manual

6-3 Cleaning

7. RS232 PC SERIAL INTERFACE

The instrument has RS232 PC serial interface via a 3.5
mm terminal ( 3-16, Fig. 1 ).
The data output is a 16 digit stream which can be
utilized for user's specific application.
A RS232 lead with the following connection will be
required to link the instrument with the PC serial port.
Meter
Center Pin..........................Pin 4
(3.5 mm jack plug)
Ground/shield.......................Pin 2
The 16 digits data stream will be displayed in the
following format :
D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
Cleaning - Only use
Caution :
the dry cloth to clean
the plastic case !
14
PC
(9W 'D" Connector)
2.2 K
resister
Pin 5