Front Panel Features; Rear Panel Features - Wohler MON1-T/7W-HR User Manual

MON1 HR Series User Manual P/N 821633 Rev-A
Please refer to Figure-2a on the facing page to familiarize yourself with the front panel features of the MON1 HR Series unit. The
following sections describe these functions and are referenced, by number, to Figure-2a.
1
Power Indication LED
This LED glows GREEN to indicate the units Power Connector (Item A) is connected to mains power and an operation voltage
is present.
2
LCD Video Display Controls (Brightness/Contrast)
The LCD video displays are adjustable using these two image controls:
• BRIGHTNESS - adjust for desired screen brightness.
• CONTRAST - adjust for desired image scene, dark-to-bright contrast.
3
LCD Video Display
View the input video source here. Screen image brightness and contrast are adjustable by two manual controls (Item 2).
Supported PAL/NTSC, HD, and SD formats are automatically detected and accomodated. See page 5 for specifications and
page 6 for the optical characteristics of this high-resolution LCD display.
Please refer to Figure-2b on the facing page to familiarize yourself with the rear panel features of the MON1 HR Series unit. The
following sections describe these features and are referenced, by letter, to Figure-2b.
A
Power Connector
Attach a standard IEC-320 power cord between this connector and mains power. The front panel Power LED (Item 1) will glow
GREEN to indicate that an operating voltage is present.
B
Option Switch
This 10-position BCD switch is used to select the bootload and fill options. Fill options display a solid field of 100% of selected
color in the absence of an incoming video signal. Settings are shown in the table below:
NOTES:
1) For normal operation, the BCD switch must be set to positions 1, 2, 3, or 4.
2) If the unit is powered while the switch is set to position 5, a cyan fill will be displayed on the screen.
C
SDI Output Connector
This connector outputs an buffered and equalized copy of the SD-SDI or HD-SDI signal entering the SDI Input Connector
(Item D).
D
SDI Input Connector
This female BNC connector input accepts either SD-SDI or HD-SDI inputs of various SMPTE standards (see LCD Display
Video Raster Format Parameters table on page 6) and is terminated at 75Ω Ω Ω Ω Ω .
E
SDI Lock Indication LED
This LED glows GREEN to indicate that the SDI source signal connected to the SDI input is "locked".
8

Front Panel Features

Rear Panel Features

© 2005 PANORAMAdtv ALL rights reserved
Section 2: Operation