Sim Card Tray Bracket - HP Envy x2 Maintenance And Service Manual

SIM card tray bracket

Description
SIM card tray
Before removing the SIM card tray bracket, follow these steps:
1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the tablet.
3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4. Remove the display panel assembly (see
the following components:
a. Battery (see
b. USB Type-C board (see
c. Audio board (see
d. Volume button board (see
Remove the SIM card tray bracket:
1. Remove the Phillips PM2.0×2.5 screw (1) that secures the volume button board to the back cover.
2. Remove the SIM card tray bracket (2).
Reverse this procedure to install the SIM card tray bracket.
Display panel assembly on page
Battery on page 36)
USB Type-C board on page
Audio board on page
Volume button board on page
39)
45)
46)
Component replacement procedures
Spare part number
L05105-001
32), and then remove
51