Display Panel Assembly - HP Envy x2 Maintenance And Service Manual

Display panel assembly

Description
12.3-in, WUXGA, WLED, BrightView (1920×1280), uslim-bent (1.96-mm), UWVA, PSR, 3:2 ultra wide aspect
ratio, flush-glass panel, TouchScreen display assembly
Back cover
IMPORTANT:
and replacement.
Before disassembling the tablet, follow these steps:
1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the tablet.
3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
Remove the display panel assembly:
1. Position the tablet with the front toward you.
2. Attach suction cups (1) to the display panel and back cover.
3. Place the suction cup handles (2) to the closed position.
4. Lock the suction cups into place (3).
32 Chapter 5 Removal and replacement procedures
Make special note of each screw and screw lock size and location during removal
Spare part number
L10651-001
L05094-001