HP Envy x2 Maintenance And Service Manual page 45
Hide thumbs
Also See for Envy x2:
- Technical white paper (8 pages) ,
- User manual (93 pages) ,
- Product end-of-life disassembly instructions (22 pages)
Table of Contents
Advertisement
2.
Remove the one Phillips PM2.0×2.0 screw that secures the SD card reader bracket to the enclosure (1),
and then remove the bracket (2).
3.
Remove the three Phillips PM2.0×2.8 screws that secure the bracket to the enclosure (1), and then
remove the bracket (2).
4.
Disconnect the battery cable (1) from the system board.
5.
Remove the four Phillips PM2.0×2.0 screws (2) that secure the battery to the back cover.
Component replacement procedures
37
Advertisement
Table of Contents
