HP Envy x2 Maintenance And Service Manual page 57
Hide thumbs
Also See for Envy x2:
- Technical white paper (8 pages) ,
- User manual (93 pages) ,
- Product end-of-life disassembly instructions (22 pages)
Table of Contents
Advertisement
1.
Release the ZIF connector (1) to which the infrared camera cable is connected, and then disconnect
the infrared camera cable from the system board.
2.
Detach the front-facing camera (2) from the back cover. (The infrared camera is attached to
the back cover with double-sided adhesive.)
3.
Remove the front-facing camera (3) from the back cover.
Remove the rear-facing webcam:
1.
Release the ZIF connector (1) to which the infrared camera cable is connected, and then disconnect
the infrared camera cable from the system board.
2.
Detach the rear-facing camera (2) from the back cover. (The infrared camera is attached to
the back cover with double-sided adhesive.)
Component replacement procedures
49
Advertisement
Table of Contents
