Change Temperature; Room Temperature - Honeywell D6 PRO Installation Manual

Idle mode
The controller goes into Idle mode (the screen is dim) after 45 seconds of
inactivity. Press any button to wake up the controller. The wake up button
push does not change temperature or settings.
Change mode
1. Be sure the controller is not in Idle mode, then press
system mode.
2. Stop pressing
The ductless unit will beep when it gets a command from the controller.
Symbol
[screen is
blank]

Change temperature

Warmer

Room temperature

Any time the controller is not being interacted with, the current room
temperature is displayed on screen.
Viewing set temperature
Be sure the controller is not in Idle mode, then press
the current set temperature. The set temperature will "pulse" on screen.
After a short period of time the screen will change to display the room
temperature.
Change temperature
1. Be sure the controller is not in Idle mode, then press
than once to change the set temperature so it is higher or lower in the
current mode.
2. Stop pressing
3. The screen will pulse and then return to the room temperature
display.
o
when you reach the mode you want.
Heat mode - the ductless unit warms the space to the
temperature shown on the controller.
Cool mode - the ductless unit cools the space to the
temperature shown on the controller.
Off mode - the ductless unit is turned off
+ -
or when you reach the temperature you want.
Mode
5
o
to change the
Cooler
+ -
or once to view
+ -
or more