Rdm; Wireless Dmx Operation - Robe ROBIN colorstrobe lite User Manual

This fixture supports RDM operation. RDM (Remote Device Management) is a bi-directional communications
protocol for use in DMX512 control systems, it is the new open standard for DMX512 device configuration and
status monitoring.
The RDM protocol allows data packets to be inserted into a DMX512 data stream without adversely affecting
existing non-RDM equipment. By using a special „Start Code," and by complying with the timing specifications
for DMX512, the RDM protocol allows a console or dedicated RDM controller to send commands to and receive
messages from specific moving lights.
RDM allows explicit commands to be sent to a device and responses to be received from it.
The list of commands for the Robin ColorStrobe Lite is the following.
Parameter ID
DISC_UNIQUE_BRANCH
DISC_MUTE
DISC_UN_MUTE
DEVICE_INFO
SUPPORTED_PARAMETERS
SOFTWARE_VERSION_LABEL
DMX_START_ADDRESS
IDENTIFY_DEVICE
DEVICE_MODEL_DESCRIPTION
MANUFACTURER_LABEL
DEVICE_LABEL
SENSOR_DEFINITION
SENSOR_VALUE
DISPLAY_INVERT
DISPLAY_LEVEL
PAN_INVERT
TILT_INVERT
DEVICE_RESET
DMX_PERSONALITY
DMX_PERSONALITY_DESCRIPTION
STATUS_MESSAGES
STATUS_ID_DESCRIPTION
DEVICE_HOURS
PARAMETER_DESCRIPTION
ROBE_DMX_INPUT
ROBE_WIRELESS_UNLINK
The wireless DMX version of the Robin ColorStrobe Lite is equipped with the Lumen Radio CRMX module
and antenna for receiving DMX signal. CRMX module operates on the 2.4 GHz band.
The item " Wireless " from the menu "DMX Input" allows you to activate receiving of wireless DMX (Person-
ality--> DMX Input -->Wireless.).
To link the fixture with DMX transmitter.
The fixture can be only linked with the transmitter by running the link procedure at DMX transmitter .
After linking , the level of DMX signal ( 0-100 %) is displayed in the menu item "Wireless State" (Information
-->Wireless State).
To unlink the fixture from DMX transmitter.
The fixture can be unlinked from receiver via the menu item " Unlink Wireless Adapter" (Information--> Wireless
State --> Unlink Wireless Adapter.).

8. RDM

Discovery command SET command
*
*
*

9. Wireless DMX operation

25
GET command
*
*
*
* *
* *
*
*
* *
*
*
* *
* *
* *
* *
*
* *
*
*
*
*
*
* *
*