Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ADJ 3D VISION PLUS
Summary of Contents for ADJ 3D VISION PLUS
- Page 1 3D VISION PLUS User Instructions 11/17 5005510...
- Page 2 All non-ADJ Products, LLC brands and product names are trademarks or registered trademarks of their respective companies. ADJ Products, LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic...
-
Page 3: Table Of Contents
DMX Channel Mode System Menu Operating Instructions DMX Control Master-Slave Configuration Multiple Unit Power Linking Pixel Configuration Diagram Mounting and Grouping Dimensional Drawings Fuse Replacement Warranty Technical Specifications ADJ Products, LLC - www.adj.com - 3D Vision Plus User Manual Page 2... -
Page 4: Introduction
Introduction Unpacking: Thank you for purchasing the 3D Vision Plus by ADJ Products, LLC. Every 3D Vision Plus has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit has arrived intact. -
Page 5: Features
3D Vision Plus Warranty Registration The 3D Vision Plus carries a 2 year limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre- paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return package. -
Page 6: Safety Precautions
C. The fixture has been exposed to rain or water. D. The fixture does not appear to operate normally or exhibits a marked change in performance. E. The fixture has fallen and/or subjected to extreme handling. ADJ Products, LLC - www.adj.com - 3D Vision Plus User Manual Page 5... -
Page 7: Dmx Channel Mode
0% - 100% RED 3 0 - 255 0% - 100% GREEN 3 0 - 255 0% - 100% BLUE 3 0 - 255 0% - 100% ADJ Products, LLC - www.adj.com - 3D Vision Plus User Manual Page 6... - Page 8 0% - 100% GREEN 3 0 - 255 0% - 100% BLUE 3 0 - 255 0% - 100% CHANNEL 13 MODE CONTINUED ON THE NEXT PAGE ADJ Products, LLC - www.adj.com - 3D Vision Plus User Manual Page 7...
-
Page 9: Green
227 - 233 SOUND ACTIVE GREEN & MAGENTA CHASE 234 - 240 SOUND ACTIVE ALL COLORS 241 - 255 NO FUNCTION CHANNEL 13 MODE CONTINUED ON THE NEXT PAGE ADJ Products, LLC - www.adj.com - 3D Vision Plus User Manual Page 8... - Page 10 PULSE STROBING SLOW - FAST 160 - 191 LED ON 192 - 223 RANDOM STROBING SLOW - FAST 224 - 255 LED ON MASTER DIMMER 0 - 255 0% - 100% ADJ Products, LLC - www.adj.com - 3D Vision Plus User Manual Page 9...
-
Page 11: System Menu
Default set to Con1-Con6 6 different pixel partitions (See Page 14 For Diagram) “ ” Con1 dIEr Default set to dI01-dI16 16 brightness grade “ ” dl16 ADJ Products, LLC - www.adj.com - 3D Vision Plus User Manual Page 10... -
Page 12: Operating Instructions
2. The current setting will be displayed. Use the UP or DOWN buttons to toggle between “Slave” (SLAu) or “Master” (NASt), and press ENTER to select your setting. 3. Press the MENU button to exit and return to the main menu with no changes. ADJ Products, LLC - www.adj.com - 3D Vision Plus User Manual Page 11... - Page 13 2. The current setting will now be displayed. Use the UP and DOWN buttons to adjust the brightness to your liking. 3. Press ENTER when you are finished or press the MENU button to return to the main menu. ADJ Products, LLC - www.adj.com - 3D Vision Plus User Manual Page 12...
-
Page 14: Dmx Control
The maximum that can be connected is 130 fixtures @ 120V and 250 fixtures @ 240V. After the maximum connected fixtures you will need to use a new power outlet. NOTE: USE CAUTION WHEN POWER LINKING OTHER FIXTURES TO THE 3D VISION PLUS AS THE POWER CONSUMPTION OF OTHER LIGHTING FIXTURES WILL VARY! -
Page 15: Pixel Configuration Diagram
“TOP”. Look for the word TOP printed on the backside to determine the TOP section. To change the position of PIXEL #1, select one the pixel configurations (1-6) in the system menu. See ilustration below for the pixel configuration layout. ADJ Products, LLC - www.adj.com - 3D Vision Plus User Manual Page 14... -
Page 16: Mounting And Grouping
(as seen below) to attach to trussing. See the next page for all rigging areas and quick release connections. ADJ Products, LLC - www.adj.com - 3D Vision Plus User Manual Page 15... - Page 17 Rigging bar attachment points PL Quick Release: SKU# 3DV175 Quick Release panel lock is used to connect the units to one another. See page 15. Hanging Bracket: SKU# 3DV149 ADJ Products, LLC - www.adj.com - 3D Vision Plus User Manual Page 16...
-
Page 18: Dimensional Drawings
3D Vision Plus Dimensional Drawing 15.93”/404.7mm 4.68”/119mm ADJ Products, LLC - www.adj.com - 3D Vision Plus User Manual Page 17... -
Page 19: Fuse Replacement
3. Always be sure to dry all parts completely before plugging the unit back in. Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog resi- due, dust, dew). ADJ Products, LLC - www.adj.com - 3D Vision Plus User Manual Page 18... -
Page 20: Warranty
ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because not properly maintained as set forth in the instruction manual. -
Page 21: Technical Specifications
2 Year (730 days) Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice. ADJ Products, LLC - www.adj.com - 3D Vision Plus User Manual Page 20... - Page 22 ADJ Products, LLC 6122 S. Eastern Ave. Los Angeles, CA 90040 USA Tel: 323-582-2650 / Fax: 323-725-6100 Web: www.adj.com / E-mail: info@americandj.com A.D.J. Supply Europe B.V. Junostraat 2 6468 EW Kerkrade Netherlands service@adjgroup.eu / www.adj.eu Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99...
Need help?
Do you have a question about the 3D VISION PLUS and is the answer not in the manual?
Questions and answers