ADJ 3D VISION PLUS User Instructions page 13

3D Vision Plus Operating Instructions
Auto Program - With this function, you can run an internal program. Make sure the DMX state is set to "Auto"
as well.
1. Press the MENU button so that "Auto" is displayed, then press ENTER.
2. Press the UP or DOWN buttons until "RAND" is displayed, and press ENTER. The program will now run.
3. If you would like to select a program, press the UP or DOWN buttons until "AuXX" is displayed. "XX"
represents the current program that is displayed. Use the UP or DOWN buttons to find your desired program.
There are 16 programs to choose from.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
5. To adjust the program speed, press the MENU button until "SPEd" is displayed and press ENTER. Use the
UP or DOWN buttons to adjust the program speed to your desire and press ENTER to confirm.
Sound Active Mode - With this function, you can activate sound active mode.
1. Press the MENU button so that "Soun" is displayed, and press ENTER.
2. Press the UP or DOWN buttons until "RAND" is displayed, and press ENTER. The program will now run.
3. If you would like to select a program, press the UP or DOWN buttons until "SuXX" is displayed. "XX" rep-
resents the current program that is displayed. Use the UP or DOWN buttons to find your desired sound active
program. There are 16 programs to choose from.
4. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
5. To adjust the sound sensitivity, press the MENU button until "SEns" is displayed and press ENTER. Use the
UP or DOWN buttons to adjust the sensitivity to your desire and press ENTER to confirm.
Pixel Configuration - With this function, you are able to change the pixel configuration. There are 6 configuations
to choose from. Please see page 14 for the different configurations.
1. Press the MENU button so that "ConF" is displayed, and press ENTER.
2. The current configuration will now be displayed. Use the UP and DOWN buttons to scroll through the differ-
ent configurations until you find your desired one.
3. Press ENTER to confirm your selection or press the MENU button to return to the main menu.
Brightness Adjustment - With this function, you are able to change the output intensity.
1. Press the MENU button so that "dIEr" is displayed, and press ENTER.
2. The current setting will now be displayed. Use the UP and DOWN buttons to adjust the brightness to your
liking.
3. Press ENTER when you are finished or press the MENU button to return to the main menu.
ADJ Products, LLC - www.adj.com - 3D Vision Plus User Manual Page 12