Table of Contents
Advertisement
Embedded Web Server ( 2 Management IP Accounts)
HTTP Port: This is the port number that the router embedded web server (for web-based
configuration) will use. The default value is the standard HTTP port 80. Users may specify an
alternative if, for example, they are running a web server on a PC within their LAN.
Management IP Address: You may specify an IP address for logon and access the router web
server. Setting the IP address to 0.0.0.0 will disable IP address restrictions, allowing users to login
from any IP address.
Expire to auto-logout: Specify a duration for the system to log the user out of the configuration
session automatically.
For Example:
User A changes the HTTP port number to 100, specifies their own IP address as 192.168.1.55
and sets the logout time as 100 seconds. The router will only allow User A to access the Web
GUI from the IP address 192.168.1.55 by typing
Nevertheless, after 100 seconds the device will automatically log User A out of the system.
Universal Plug and Play (UPnP)
UPnP offers peer-to-peer network connectivity for PCs and other network devices, along with
control and data transfer featuers between devices. UPnP offers many advantages for users that
run NAT routers through UPnP NAT Traversal and on supported systems. This makes tasks such
as port forwarding become easier by letting the application control the required settings & remove
the need for the user to control the advanced configuration of their device.
Both operating system and the relevant application must support UPnP in addition to the router.
Windows XP and Windows ME natively support UPnP (when the component is installed) while
Windows 98 users may install the Internet Connection Sharing client from Windows XP in order to
gain support for UPnP. Nevertheless Windows 2000 does not support UPnP.
Disable: Check to disable the router's UPnP functionality.
Enable: Check to enable the router's UPnP functionality.
UPnP Port: Its default setting is 2800. It is highly recommended for users to use this port value. If
this value conflicts with other ports already being used, you may wish to change the port.
SNMP Access Control (Software on a PC within the LAN is required in order to utilize this
function) – Simple Network Management Protocol.
SNMP V1 and V2:
Read Community: Specify a name to be identified as the Read Community and an IP address.
This community string will be checked against the string entered in the configuration file. Once the
string name is matched, user with this IP address will be able to view the data.
Write Community: Specify a name to be identified as the Write Community and an IP address.
This community string will be checked against the string entered in the configuration file. Once the
string name is matched, users with this IP address will be able to view and modify the data.
Trap Community: Specify a name to be identified as the Trap Community and an IP address.
This community string will be checked against the string entered in the configuration file. Once the
string name is matched, users with this IP address will be sent SNMP Traps.
SNMP V3:
Specify a name and password for authentication and define the access right from an identified IP
address. Once the authentication has succeeded, users with this IP address will be able to view
and modify the data.
http://192.168.1.254:100
107
in their web browser.
Advertisement
Table of Contents
