Table of Contents
Advertisement
Profile Port: Select the connection mode. There is ADSL.
Protocol: Select the protocol;. The default is PPPoE.
VPI/VCI: Enter the VPI and VCI information provided by your ISP.
Username: Enter the username provided by your ISP.
Password: Enter the password provided by your ISP.
Service Name: This item is for identification purposes. If it is required, your ISP provides you the
information.
Auth Protocol: Default is Auto. Your ISP advises on using Chap or Pap.
MTU: Maximum Transmission Unit. The size of the largest datagram (excluding media-specific
headers) that IP will attempt to send through the interface.
IP Address: Your WAN IP address. Leave this at 0.0.0.0 to obtain automatically an IP address from
your ISP.
33
Advertisement
Table of Contents
